Welder Needed ASAP(May,2012)

Welder Needed ASAP(May,2012)
Welder Needed ASAP

STICK WELDERS - Certified pipe Welders, ASME B31, working in-ground and above ground. Schedule 40 carbon steel pipe from 2" to 14". Must have Certificate and Continuity. Must be able to pass X-ray analysis of your welds. Reply Now or Call Roxann 1-866-532-6777 ext 405.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Welding Engineer(May,2012)

Welding Engineer(May,2012)
Welding Engineer

Experienced Welding Engineer Needed! - Oshkosh, WI area
Our client, a leader in their industry, is searching for an experienced, degreed welding engineer. This is a rare opportunity for you to take your career to the next level while working for an organization that has excelled for decades. The welding engineer will be responsible for leading welding initiatives in the plant. Proven success in project management is a must.

Job Responsibilities:

Develop welding processes
Investigate weld defects
Supervise welding processes out on the shop floor
Improve current processes
Aid in materials selection
Train welders
Develop WPS
Troubleshoot
Suggest lean improvement efforts
Improve plant lay-outs
Qualified candidates will have at least 5 years industry experience in a non-automotive environment. This position is an extremely hands-on role for someone who enjoys getting out on the floor and working with manufacturing.

ABSOLUTELY MUST have:

* Bachelor's Degree in Welding Engineering or 2 years Associates Degree in Welding Engineering (NO exceptions!)

* 5+ years Non-Automotive welding engineering experience; heavy manufacturing experience preferred

* Experience and Proficiency in SMAW, GMAW, FCAW and resistence welding processes

Keep the salary requirements under $75K .

Some relocation assistance available .

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

UNIQUE SALES AGENT(May,2012)

UNIQUE SALES AGENT(May,2012)
UNIQUE SALES AGENT

If you have no fear of walking on coals, you are the person we want to talk to.

Small, aggressive $18mm annual sales fabricator of metering systems, flare systems, skids, provers and much more, catering to the oil and gas industry, seeks sales agent to take us to the next level.

Starting Salary: $50,000 + commissions + quarterly bonuses

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Welder Needed to Start Monday!(May,2012)

Welder Needed to Start Monday!(May,2012)
Welder Needed to Start Monday!

Certified Welder Needed for Commercial Manufacturing position. Ideal candidate will have experience custom fabricating and repairing using various welding techniques. Start Monday, 12/7, APPLY NOW!

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

MIG Welders(May,2012)

MIG Welders(May,2012)
MIG Welders

Description
Seeking resumes for MIG Welders.

Job located in IL in a Fab shop.

Working 6 - 10's.

Mig welding various parts for tractors and heavy equipment.


Requirements
Must have Mig and thin gauge sheetmetal experience

Must be willing to work overtime.


Contact Kayci at 800-748-1395

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

engineering(May,2012)

engineering(May,2012)
engineering

oil and gas company

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Welding Engineer(May,2012)

Welding Engineer(May,2012)
Welding Engineer

Growth oriented automotive company are looking for a Welding Engineer ... prefer to hire on a 6 MONTH CONTRACT TO DIRECT BASIS.

Must be an expert in fine tuning automated assembly systems.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Welding Engineer(May,2012)

Welding Engineer(May,2012)
Welding Engineer

Direct hire permanent position with excellent company in the Louisville KY area.

I am working with a key client in the Louisville KY area on a Welding Engineering position and your background seems to be a match at first glance. My client has been in business since 1947 and began with only 3 employees. They now have 4 plants on the campus in KY with locations in PA and Indiana. This is a locally run company serving market leaders in a wide variety of industries. They are a thriving corporation that embraces its heritage while continually preparing itself for the opportunities and challenges the future will bring.

The number one goal of my client is for everyone to come to work with a good attitude and have enjoy working while meeting the financial needs of the company. They understand the needs of people and that they have lives outside of the workplace. There is huge potential with this company and the stability over the past 50 years has a proven track record.
Summary:

• Develops welding techniques, procedures, and application of welding equipment or problems involving fabrication of ferrous and non-ferrous metals.
• Utilizes knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles.
• Conducts research and development in this field.
o Develops and test new fabrication processes and procedures, improves existing or new welding equipment.
Develops new or advanced welding methods, techniques, and procedures, to substantiate created hypothesis.
• Prepares technical reports as result of research and development and preventive maintenance investigations.
• Establishes welding procedures to guide production and welding personnel relating to specification restrictions, material processes, pre and post-heating requirements which involve use of complex alloys, unusual fabrication methods, welding of critical joints, and complex post heating requirements.

Requirements;

BS Welding Engineering
3-5 years experience in mfg/job shop
Experience with welding and weld technology
Experience with aluminum and titanium preferred
Laser welding experience highly preferred


Should this position be of interest to you then please send me your resume in Word format with "Welding Engineer" in the subject line. I will then call you to discuss in more depth and determine your interest level. If you know someone that might be interested , please share this email with them. Thanks so much and I hope to hear back from you.

Amelia King
King Resources
Charlotte NC
704-365-5558

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Fitter - Welders(May,2012)

Fitter - Welders(May,2012)
Fitter - Welders

Vitality - Intensity - Stamina - Staying Power " Strength… This is VIGOR!

US Fab is part of the Vigor Industrial family of industrial services. We are an innovative manufacturer based in the Pacific Northwest. From sea-worthy barges to methane gas recycling systems, we use advanced technology and specialized manufacturing to meet our customer’s needs.

We have a new contract and are in need of CAPABLE, EXPERIENCED AND RELIABLE WELDERS and FITTER/WELDERS.

• Family benefits only 50 dollars a month with a very short waiting period
• Access to local training facilities, so you can keep your welding skills up to date
• 401k with match, Short Term Disability, Life Insurance and EAP
• Union Wages through the Local 104 (you do not have to be a union member to apply or to be hired by US Barge, but should you be hired you will have 30 days to join)

DUTIES CONSIST OF TH FOLLOWING (this is not an all-inclusive list, other duties within the accepted job scope will apply):
• Groove weld in all positions; flat, horizontal, vertical and overhead for up to 10 hours a day, 5 and 6 days a week
• Fit as needed
• Work with flux core wire up to 1/16th inch

REQUIRED EDUCATION AND EXPERIENCE:
• High School Diploma/GED or 10th grade education with 6 months to 2 years equivalent industrial training and or equivalent industrial experience
• 2 years professional experience as a FITTER-WELDER in addition to related education and training
• Structural welding experience as a FITTER-WELDER

REQUIRED SKILLS:
• Ability to pass a 3G and 4G with .052 wire, in accordance with ABS standards.
• Safely perform work in small and/or confined spaces, on ladders, and at heights of 20 feet or more
• Effectively communicate information and ideas in English both verbally and in writing without assistance or translation
• Complete installation and fabrication to exceed published standards and/or project specifications
• Perform math calculations (add, subtract, divide, multiply) and use mathematics based logic to solve complex problems
• Accurately use a tape measure and other measuring devices

WORK ENVIRONMENT REQUIREMENTS:
Work is performed in a wide variety of environments including heights of 20 feet or more, small and/or confined spaces, and outdoors in all weather conditions. Will routinely bend, twist, kneel, walk, climb, and reach for 1-12 hours per day. Will sit, stand, and walk for 1-12 hours per day. Will endure noise, fumes, dust, and inclement weather.

Must be able to lift and carry 1-80 lbs throughout the day. Must be able to push or pull up to 75 lbs and safely wear a respirator when needed.

Must have the ability to perform the essential job duties with or without reasonable accommodation and without posing a direct threat to safety or health of employee or others.

APPLICATION INSTRUCTIONS:
Call 503-517-8659 or email recruiter(at)USFabrication(dot)com to request an application via email or for instructions to apply on-line.

VIGOR INDUSTRIAL CODE:
Be Smart - Be Careful - Be Productive - Be Flexible - Be Considerate

We welcome qualified applicants from diverse backgrounds.
US Fab is an Equal Opportunity Employer and Drug Free Work Environments.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

6G Fluxcore Dual Shield Welders Needed ASAP(May,2012)

6G Fluxcore Dual Shield Welders Needed ASAP(May,2012)
6G Fluxcore Dual Shield Welders Needed ASAP

Tradesmen International is currently seeking Flux Core Pipe Welders for work in TX. The job is 3-6 months long. This job will have an hourly pay rate of $25.00/hr. You will work 56 hours a week, Monday thru Thursday will be 10 hour days, and Friday and Saturday will be 8 hour days. The Per Diem will be paid on days worked, so you will get 6 days per diem at $80 a day which equals $480 a week. You will be required to pass a 6GR Flux core Dual Shield weld test. Testing details will be gone through in detail upon phone interview.

Applicants MUST:

Must have at least 5 years of Pipe Welding Exp.

Must be able to pass a 6GR Flux core pipe welding test

Be dedicated to working SAFELY and professionally

Have your own tools

Provide trade related references

Have a valid driver's license

Have your own reliable transportation


Interested, qualified candidates can call Tradesmen International at 877-344-9837


Tradesmen International is an Equal Opportunity Employer (EOE).

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Welding Engineer(May,2012)

Welding Engineer(May,2012)
Welding Engineer

Needed Welding Engineer with Robotics, panasonic, fanuc to lead a team in WI.
Relocation provided. Must have a degree or 3-5 yrs welding experience.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Certified Welder/ steel fabricator(May,2012)

Certified Welder/ steel fabricator(May,2012)
Certified Welder/ steel fabricator

welding, fabricating small structural projects, all types of railings, steel stairs, ladders and other miscellaneous metals. Have the ability to read blue prints. Looking for someone who is motivated, hard working and looking to move up to a management position or quality control over the shop. Other opportunities may be available as well.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Welder(May,2012)

Welder(May,2012)
Welder

Welder for tank welding; must have 3-5 years experience with blueprint reading skills

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Welder / Fitter(May,2012)

Welder / Fitter(May,2012)
Welder / Fitter

Large manufacturing facility in the Hobby Airport area is looking for 2nd and 3rd shift welder / fitters. Must have experience with sheetmetal welding using very thin gauge materials.
Must pass a 3G weld test.

Please fill out the online application at resourcemfg.com and email me your resume.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Welding Engineer -- Oshkosh WI(May,2012)

Welding Engineer -- Oshkosh WI(May,2012)
Welding Engineer -- Oshkosh WI

Responsibilities will include troubleshooting welding issues, developing welding standards, weld procedure specs, and job specific weld repair procedures, welder training and auditing, and working w/ outside vendors to improve service and materials.

Position requires:
1. Min of Assoc Degree in welding technology
2. Knowledge and skills in variety of weling -- which could include SMAW, GMAW, FCAW, RSW
3. 10+ yrs of welding experience in a mfg environment
4. Team project engineering experience

Salary DOE from $65-$90K plus relo plus full benefits.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

X - Ray Welder(May,2012)

X - Ray Welder(May,2012)
X - Ray Welder

Birmingham, AL - X-Ray WELDERS:
Experienced X-Ray Pipe WELDERS needed. Will be X-Ray welding schedule-40 pipes, 2", 6", 8" pipes with 5P+ welding rods. Fabrication Shop environment. MUST have previous X-Ray pipe welding experience. NEED Welding hood. Will be X-Ray welding tested on first day for acceptance. LOCALS ONLY (Birmingham), NO travelers.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Full Time Welder Needed(May,2012)

Full Time Welder Needed(May,2012)
Full Time Welder Needed

Rapidly expanding custom Metal Fabrication Company is seeking a Full Time experienced certified welder. Welder must be certified in both MIG and TIG. Must be excellent in layout, shearing, breaking, punching, finishing, polishing, etc… Must have blue print reading and take off skills. Must be proficient in the project management of multiple jobs. Must be a motivated self starter.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Pipe Welder(May,2012)

Pipe Welder(May,2012)
Pipe Welder

Description
General Purpose:
Pipe Welder for a company that provides precision parts for the oil and gas industry with the following requirements:

Pipe Welder
3 to 5 yrs experience minimum Mig, Stick, & Fluxcore
Must have the ability to pass a 6 G Weld Test
Must have own tools
Must work well with others
Must perform stationary and roll position
Experience in job shop environment
Must be a self-starter and self-motivated

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

Pipe Welders Needed ASAP!! Great Pay and Benefits!(May,2012)

Pipe Welders Needed ASAP!! Great Pay and Benefits!(May,2012)
Pipe Welders Needed ASAP!! Great Pay and Benefits!

Tradesmen International is currently seeking Pipe Welders in Minnesota, Louisiana, and Virginia. The jobs vary in length ranging from 2 months to 8 months. Pay also varies by each job. The pay ranges from $25.00/hr for pipe welders and $27.00/hr for Aluminum Pipe Welders. Each job also comes with a daily per diem, the jobs in Minnesota and Louisiana have per diem of $80 At each job you will be required to pass a 6G weld test. Testing details will be gone through in detail upon phone interview. All welds will have to be X-Ray quality and pass a visual inspection.

Applicants MUST:

Must have at least 5 years of Pipe Welding Exp.

Must be able to pass a 6g pipe welding test

Be dedicated to working SAFELY and professionally

Have your own tools

Provide trade related references

Have a valid driver's license

Have your own reliable transportation


Interested, qualified candidates can call Tradesmen International 877-334-9837


Tradesmen International is an Equal Opportunity Employer (EOE).

Note: Please mention GetWeldingJobs.com in your cover letter when applying.

welder/fitter(May,2012)

welder/fitter(May,2012)
welder/fitter

Job Advertisement Carribean Island
Welder /Fitter job Opportunity for a structural steel job.
Applicant should be AWS D1.1 Structural welding certified all position certification groove welds. Applicant should be familiar with basic structural blueprints and dimensioning. Job is on-site with overtime until the duration of project. Applicants must have a valid current passport and pass drug screen and background check. Project starts late april 2012.

Note: Please mention GetWeldingJobs.com in your cover letter when applying.